repaired the Excell bi-radial pressure washer

So more than the thermal fuse was leaking on my old pressure washer.  Replaced the thermal fuse and it was still leaking.  Apparently because of the bi-radial piston design it uses a "dead" hose to balance
pressure surges and it had worn a hole after 14 years of use.

It was the first item that popped up on Amazon parts search

new part

worn hole in hose against plastic pump shield

need to remove hose and outlet to remove shield to replace "dead" hose and thermal fuse

reassembled - remember to turn off fuel before laying on back

reassembled and upright

hose connector screws into pump using 3/8" hex drive

Video on the pump function.

So now that the leaks are solved I can make a update on the foam canyon pressure washer switch.